Orifice Union Flange ASME B16.47 / ANSI B16.5

Orifice Union Flange Manufacturers and Suppliers in India, ANSI B16.5 Orifice Union Flange, ASME B16.47 Orifice Union Flange Dimensions, MSS SP-44 Orifice Union Flanges, Threaded Orifice Union Flanges Supplier

An orifice union flange is a type of flange used in pipeline systems to connect two sections of pipe and provide a means of measuring flow rate. It consists of a flange with a precision-drilled orifice plate located in the center, which creates a constriction in the flow path. This constriction causes a pressure drop that can be measured and used to calculate the flow rate of the fluid passing through the pipe.

The orifice plate is typically made of stainless steel, and the flange can be made from a variety of materials depending on the application. Orifice union flanges are commonly used in industries such as oil and gas, chemical processing, and water treatment.

The orifice union flange provides a simple and cost-effective method of flow measurement, and it can be easily installed and removed for maintenance or inspection. However, it is important to ensure that the orifice plate is properly sized and installed to ensure accurate flow measurement.

Orifice Union Flanges ASME B16.47 / ANSI B16.5

ASTM A105 Orifice Union Flange, Carbon Steel Orifice Union Flanges, Orifice Union Flange Exporter, Inconel 600 Orifice Union Flange, MSS SP-44 Orifice Union Flange, Titanium Orifice Union Flanges, EN 1092-2 PN16 Orifice Union Flanges Exporter, Orifice Union Flanges NPS, Sch 80 Schedule 40 Stainless Steel 304, 304L, 316, 316L, and 904L Orifice Union Flange, Series A & B Orifice Union Flanges, DIN 86029 PN10 Orifice Union Flange, Orifice Union Forged Flange, Nickel Alloy Orifice Union Flange, Alloy 20 Orifice Union Flange, SMO 254 Orifice Union Flange , MS Orifice Union Flange at the Lowest Prices.

Orifice Union Flange Specifications

Size Range

1/2″ (15 NB) to 48″ (1200NB)

Class / Pressure Rating

150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

Standards / Dimensions

ANSI/ASME B16.5, B16.47 Series A & B, B16.48, JIS B2220, BS 4504, BS 10, BS1560-3.1, EN-1092, DIN, AS, GOST, MSS SP-44, ISO 70051, API7S-15, API7S-43, API605, AWWA, DIN

Connection Type

Ring Joint Flange (RTJ), Flat Face Flange (FF), Raised Face Flange (RF), Male and Female Flange (M & F), Lap Joint Flange, Large and Small Tongue-and-Groove Flange (T & G)

Material Standards

ASTM A105, ASTM A350, ASTM A182, ASTM A216, ASTM A352, ASTM A217, ASTM A515, ASTM A516, ASTM A203, A204, ASTM A387, ASTM A240, ASTM A694 Orifice Union Flange

ANSI/ASME 16.5 Orifice Union Flange Materials & Grades

ASTM A182 Orifice Union Flange
Stainless Steel 304, 304L, 316, 316L, 316H, 316Ti, 310, 310S, 317, 317L, 321, 347, 347H, 904L, SMO 254/6Mo, Duplex Steel-S31803/S32205, Super Duplex-S32750/S32760 F51, F52, F53, F54, F55, F57, F59, F60, F61, Alloy Steel F1, F5, F9, F11, F12, F22, F91
ASTM B564 Orifice Union Flange
Incoloy 800, 800H, 800HT, 825, 925, Inconel 600, 601, 625, 718, 783, 690, X750, Nickel 200, 201, 205, 205LC, Hastelloy C276, C22, C4, C2000, B2, B3, X, Monel 400, 500
ASTM A105 / A105N / A350 LF2 / A694 Orifice Union Flange
Carbon Steel F52, F56, F60, F65, F70, F80
ASTM B247 Orifice Union Flange
Aluminium 7075, 5086, 6082, 3003, 5083, 6061, 1100
ASTM B61 / B62 / B151 / B152 Orifice Union Flange
Copper Nickel 90/10 (C70600 ), 70/30 (C71500), UNS C71640
ASTM B381 Orifice Union Flange
Titanium Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 12

Find the largest ready stock of Orifice Union Flange, ASME B16.47/ANSI B16.5 Orifice Union Flange, Series A & B Orifice Union Flange Manufacturers, EN 1092-1 Orifice Union Flange, Class 300, 600, 900, 1500 Orifice Union Flange Manufacturer, ASME B16.36 Orifice Unions, Orifice Union Flange,  PN10 Orifice Union Flange, Pn6, Pn10, Pn16, Pn25, Pn40, Orifice Union Flange Pn40, Din 2633 Orifice Union Flange, Asme B16.5 Class 300 Orifice Union Flange, ANSI B16.48 Class 150 Orifice Union Flange, ANSI B16.5 Class 150 BS-4504 Orifice Union Flange, ANSI 16.36 Orifice Union Flange in Mumbai, India.

ANSI/ASME B16.5 Orifice WN Flange Union Class 300 Dimensions

ANSI/ASME B16.5 Orifice WN Flange Union Class 300 DimensionsANSI/ASME B16.5 Orifice WN Flange Union Class 300 Dimensions
Drilling
Nom  SizeODThicknessOD of RFDia at BaseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of HolesBolt Dia
OCRXAYTT
in14.881.522.121.323.25 1/43.50.694 5/8
mm12438.150.853.833.582.66.488.917.515.9
in1 1/26.121.52.882.751.93.38 1/44.50.814 3/4
mm155.438.173.269.948.385.96.4114.320.619.1
in26.51.53.623.312.383.38 1/450.698 5/8
mm165.138.191.984.160.585.96.412717.515.9
in2 1/27.51.54.123.942.883.5 1/45.880.818 3/4
mm190.538.1104.6100.173.288.96.4149.420.619.1
in38.251.554.623.53.5 3/86.620.818 3/4
mm209.638.1127117.388.988.99.5168.120.619.1
in4101.56.195.754.53.62 1/27.880.818 3/4
mm25438.1157.2146.1114.391.912.7200.220.619.1
in612.51.58.58.126.633.94 1/210.620.8812 3/4
mm317.538.1215.9206.2168.4100.112.7269.722.419.1
in8151.6210.6210.258.634.38 1/213112 7/8
mm38141.1269.7260.4219.2111.312.7330.225.422.2
in1017.51.8812.7512.6210.754.62 1/215.251.12161
mm444.547.8323.9320.5273.1117.312.7387.428.425.4
in1220.521514.7512.755.12 1/217.751.25161 1/8
mm520.750.8381374.7323.913012.7450.931.828.6
in14232.1216.2516.75145.62 1/220.251.25201 1/8
mm584.253.8412.8425.5355.6142.712.7514.431.828.6
in1625.52.2518.519165.75 1/222.51.38201 1/4
mm647.757.2469.9482.6406.4146.112.7571.535.131.8
in18282.382121186.25 1/224.751.38241 1/4
mm711.260.5533.4533.4457.2158.812.7628.735.131.8
in2030.52.52323.12206.38 1/2271.38241 1/4
mm774.763.5584.2587.2508162.112.7685.835.131.8
in24362.7527.2527.62246.62 1/2321.62241 1/2
mm914.469.9692.2701.5609.6168.112.7812.841.138.1

Orifice SO Flange Union Class 300 Dimensions

ASME B16.5 Orifice SO Flange Union Class 300 DimensionsOrifice SO Flange Union Class 300 Dimensions
Drilling
Nom  SizeODThicknessOD of RFDia at BaseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of HolesBolt Dia
OCRXBYTT
in14.881.522.121.361.88 1/43.50.694 5/8
mm12438.150.853.834.547.86.488.917.515.9
in1 1/26.121.52.882.751.951.88 1/44.50.814 3/4
mm155.438.173.269.949.5047.86.4114.320.619.1
in26.51.53.623.312.441.94 1/450.698 5/8
mm165.138.191.984.162.049.36.412717.515.9
in2 1/27.51.54.123.942.942.00 1/45.880.818 3/4
mm190.538.1104.6100.174.750.86.4149.420.619.1
in38.251.554.623.572.06 3/86.620.818 3/4
mm209.638.1127117.390.752.39.5168.120.619.1
in4101.56.195.754.572.12 1/27.880.818 3/4
mm25438.1157.2146.1116.153.812.7200.220.619.1
in612.51.58.58.126.722.12 1/210.620.8812 3/4
mm317.538.1215.9206.2170.753.812.7269.722.419.1
in8151.6210.6210.258.722.44 1/213112 7/8
mm38141.1269.7260.4221.562.012.7330.225.422.2
in1017.51.8812.7512.6210.882.62 1/215.251.12161
mm444.547.8323.9320.5276.466.512.7387.428.425.4
in1220.521514.7512.882.88 1/217.751.25161 1/8
mm520.750.8381374.7327.273.212.7450.931.828.6
in14232.1216.2516.7514.143.00 1/220.251.25201 1/8
mm584.253.8412.8425.5359.276.212.7514.431.828.6
in1625.52.2518.51916.163.25 1/222.51.38201 1/4
mm647.757.2469.9482.6410.582.612.7571.535.131.8
in18282.38212118.183.5 1/224.751.38241 1/4
mm711.260.5533.4533.4461.888.912.7628.735.131.8
in2030.52.52323.1220.203.75 1/2271.38241 1/4
mm774.763.5584.2587.2513.195.312.7685.835.131.8
in24362.7527.2527.6224.254.19 1/2321.62241 1/2
mm914.469.9692.2701.5616106.412.7812.841.138.1

Orifice Threaded Flange Union Class 300 Dimensions

ASME B16.5 Orifice Threaded Flange Union DimensionsANSI/ASME/ASA B16.48 Orifice Threaded Flange Union Dimensions
Drilling
Nom SizeODThicknessOD of RFDia at BaseLTHOD of Counter BoreCounter Bore Depth (from face)Dia of Pressure ConnectionBolt CircleHole Dia# of HolesBolt Dia
OCRXYQb(2)Qf(3)FGTT
in.14.881.522.121.881.411.31.440.75 1/43.50.694 5/8
mm.12438.150.853.847.835.83336.619.16.488.917.515.9
in.1 1/26.121.52.882.751.881.991.891.470.72 1/44.50.814 3/4
mm.155.438.173.269.947.850.54837.318.36.4114.320.619.1
in.26.51.53.623.311.942.52.361.50.69 1/450.698 5/8
mm.165.138.191.984.149.363.559.938.117.56.412717.515.9
in.2 1/27.51.54.123.94232.841.750.56 1/45.880.818 3/4
mm.190.538.1104.6100.150.876.272.144.514.26.4149.420.619.1
in.38.251.554.622.063.633.461.810.56 3/86.620.818 3/4
mm.209.638.1127117.352.392.287.94614.29.5168.120.619.1
in.4101.56.195.752.124.634.451.880.56 1/27.880.818 3/4
mm.25438.1157.2146.153.8117.611347.814.212.7200.220.619.1
in.612.51.58.58.122.126.756.571.880.31 1/210.620.8812 3/4
mm.317.538.1215.9206.253.8171.5166.947.87.912.7269.722.419.1
in.8151.6210.6210.252.448.758.552.190.44 1/213112 7/8
mm.38141.1269.7260.462222.3217.255.611.212.7330.225.422.2

Orifice WN Flange Union Class 400 Dimensions

ASME B16.5 Orifice WN Flange Union DimensionsANSI/ASME/ASA B16.48 Orifice WN Flange Union Dimensions
DrillingRing Type Joint
Nom SizeODThicknessOD of RFDia at BaseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of holesBolt DiaGrove #Pitch DiaGroove DepthGroove widthRad at BottomSpec Oval RH
OCRXAYTTPEFr maxW
in4101.56.195.754.53.5 1/27.8818 7/8R375.8750.3120.4690.031.06
mm25438.1157146114.388.912.7200.225.422.2149.2257.92511.9130.826.9
in612.51.628.58.126.634.06 1/210.62112 7/8R458.3120.3120.4690.031.06
mm317.541.1216206168.410312.7269.725.422.2211.1257.92511.9130.826.9
in8151.8810.6210.258.634.62 1/2131.12121R4910.6250.3120.4690.031.06
mm38147.8270260219.211712.7330.228.425.4269.8757.92511.9130.826.9
in1017.52.1212.7512.6210.754.88 1/215.251.25161 1/8R5312.750.3120.4690.031.06
mm444.553.8324321273.112412.7387.431.828.6323.8507.92511.9130.826.9
in1220.52.251514.7512.755.38 1/217.751.38161 1/4R57150.3120.4690.031.06
mm520.757.2381375323.913712.7450.935.131.8381.0007.92511.9130.826.9
in14232.3916.2516.75145.88 1/220.251.38201 1/4R6116.50.3120.4690.031.06
mm584.260.7413426355.614912.7514.435.131.8419.1007.92511.9130.826.9
in1625.52.518.519166 1/222.51.5201 3/8R6518.50.3120.4690.031.19
mm647.763.5470483406.415212.7571.538.134.9469.9007.92511.9130.830.2
in18282.622121186.5 1/224.751.5241 3/8R69210.3120.4690.031.19
mm711.266.5533533457.216512.7628.738.134.9533.4007.92511.9130.830.2
in2030.52.752323.12206.62 1/2271.62241 1/2R73230.3750.5310.061.25
mm774.769.958458750816812.7685.841.138.1584.2009.52513.4871.531.8
in2436327.2527.62246.88 1/2321.89241 3/4
mm914.476.2692.2702609.6174.812.7812.84844.5

Orifice WN Flange Union Class 600 Dimensions

DrillingRing Type Joint
Nom SizeODThicknessOD of RFDia at baseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of holesBolt DiaGrove #Pitch DiaGroove DepthGroove widthRad at BottomSpec Oval RH
OCRXAYTTRFRJPEFr maxW
in14.881.522.121.323.25 1/43.50.690.754 5/8R1620.250.3440.031
mm12438.150.853.833.582.66.488.917.519.115.950.86.358.7380.825.4
in1 1/26.121.52.882.751.93.38 1/44.50.810.884 3/4R202.6880.250.3440.031
mm155.438.173.269.948.385.96.4114.320.622.419.168.2756.358.7380.825.4
in26.51.53.623.312.383.38 1/450.690.758 5/8R233.250.3120.4690.031.06
mm165.138.191.984.160.585.96.412717.519.115.982.557.92511.9130.826.9
in2 1/27.51.54.123.942.883.5 1/45.880.810.888 3/4R2640.3120.4690.031.06
mm190.538.1104.6100.173.288.96.4149.420.622.419.1101.67.92511.9130.826.9
in38.251.554.623.53.5 3/86.620.810.888 3/4R314.8750.3120.4690.031.06
mm209.638.1127117.388.988.99.5168.220.622.419.1123.8257.92511.9130.826.9
in410.751.56.1964.54 1/28.5118 7/8R375.8750.3120.4690.031.06
mm273.138.1157.2152.4114.3101.612.7215.925.425.422.2149.2257.92511.9130.826.9
in6141.888.58.756.634.62 1/211.51.121.12121R458.3120.3120.4690.031.06
mm355.647.8215.9222.3168.411712.7292.128.428.425.4211.1257.92511.9130.826.9
in816.52.1910.6210.758.635.25 1/213.751.251.25121 1/8R4910.6250.3120.4690.031.06
mm419.155.6269.7273.1219.213312.7349.331.831.828.6269.8757.92511.9130.826.9
in10202.512.7513.510.756 1/2171.381.38161 1/4R5312.750.3120.4690.031.06
mm50863.5323.9342.9273.115212.7431.835.135.131.8323.8507.92511.9130.826.9
in12222.621515.7512.756.12 1/219.251.381.38201 1/4R57150.3120.4690.031.06
mm558.866.5381400.1323.9155.412.748935.135.131.8381.0007.92511.9130.826.9
in1423.752.7516.2517146.5 1/220.751.51.5201 3/8R6116.50.3120.4690.031.06
mm603.369.9412.8431.8355.616512.7527.138.138.135.1419.17.92511.9130.826.9
in1627318.519.5167 1/223.751.61.6201 1/2R6518.50.3120.4690.031.19
mm685.876.2469.9495.3406.417812.7603.341.141.138.1469.9007.92511.9130.830.2
in1829.253.252121.5187.25 1/225.751.751.75201 5/8R69210.3120.4690.031.19
mm74382.6533.4546.1457.218412.7654.144.544.541.3533.4007.92511.9130.830.2
in20323.52324207.5 1/228.51.751.75241 5/8R73230.3750.5310.061.25
mm812.888.9584.2609.650819112.7723.944.544.541.3584.2009.52513.4871.531.8
in2437427.2528.25248 1/23322241 7/8
mm939.8101.6692.2717.6609.620312.7838.250.850.847.6

Orifice WN Flange Union Class 900 Dimensions

DrillingRing Type Joint
Nom SizeODThicknessOD of RFDia at BaseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of holesBolt DiaGrove #Pitch DiaGroove DepthGroove WidthRad at BottomSpec Oval RH
OCRXAYTTPEFr maxW
in39.51.5553.54 3/87.518 7/8R314.8750.3120.4690.031.06
mm241.338.112712788.9101.69.5190.525.422.2123.8257.92511.9130.826.9
in411.51.756.196.254.54.5 1/29.251.2581 1/8R375.8750.3120.4690.031.06
mm292.144.5157.2158.8114.3114.312.723531.828.6149.2257.92511.9130.826.9
in6152.198.59.256.635.5 1/212.51.25121 1/8R458.3120.3120.4690.031.06
mm38155.6215.9235168.4139.712.7317.531.828.6211.1257.92511.9130.826.9
in818.52.510.6211.758.636.38 1/215.51.5121 3/8R4910.6250.3120.4690.031.06
mm469.963.5269.7298.5219.2162.112.7393.738.134.9269.8757.92511.9130.826.9
in1021.52.7512.7514.510.757.25 1/218.51.5161 3/8R5312.750.3120.4690.031.06
mm546.169.9323.9368.3273.1184.212.7469.938.134.9323.8507.92511.9130.826.9
in12243.121516.512.757.88 1/2211.5201 3/8R57150.3120.4690.031.06
mm609.679.2381419.1323.9200.212.7533.438.134.9381.0007.92511.9130.826.9
in1425.253.3816.2517.75148.38 1/2221.62201 1/2
mm641.485.9412.8450.9355.6212.912.7558.841.138.1
in1627.753.518.520168.5 1/224.31.75201 5/8
mm704.988.9469.9508406.4215.912.761644.541.3
in183142122.25189 1/2272201 7/8
mm787.4101.6533.4565.2457.2228.612.7685.850.847.6
in2033.754.252324.5209.75 1/229.52.12202
mm857.3108584.2622.3508247.712.7749.353.850.8
in24415.527.2529.52411.5 1/235.52.62202 1/2
mm1041.4139.7692.2749.3609.6292.112.7901.766.563.5

Orifice WN Flange Union Class 1500 Dimensions

DrillingRing Type Joint
Nom SizeODThicknessOD of RFDia at BaseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of holesBolt DiaGrove #Pitch DiaGroove DepthGroove WidthRad at BottomSpec Oval RH
OCRXAYTTPEFr maxW
in15.881.522.061.323.25 1/4414 7/8R1620.250.3440.031
mm149.438.150.852.333.582.66.4101.625.422.250.86.358.7380.825.4
in1 1/271.52.882.751.93.5 1/44.881.1241R202.6880.250.3440.031
mm177.838.173.269.948.388.96.412428.425.468.2756.358.7380.825.4
in28.51.53.624.122.384 1/46.518 7/8R243.750.3120.4690.031.06
mm215.938.191.9104.660.5101.66.4165.125.422.295.257.92511.9130.826.9
in2 1/29.621.624.124.882.884.12 1/47.51.1281R274.250.3120.4690.031.06
mm244.341.1104.612473.2104.66.4190.528.425.4107.9507.92511.9130.826.9
in310.51.8855.253.54.62 3/881.2581 1/8R355.3750.3120.4690.031.06
mm266.747.8127133.488.9117.39.5203.231.828.6136.5257.92511.9130.826.9
in412.252.126.196.384.54.88 1/29.51.3881 1/4R396.3750.3120.4690.031.06
mm311.253.8157.2162.1114.312412.7241.335.131.8161.9257.92511.9130.826.9
in615.53.258.596.636.75 1/212.51.5121 3/8R468.3120.3750.5310.061.12
mm393.782.6215.9228.6168.4171.512.7317.538.134.9211.1259.52513.4871.528.4
in8193.6210.6211.58.638.38 1/215.51.75121 5/8
mm482.691.9269.7292.1219.2212.912.7393.744.541.3
in10234.2512.7514.510.7510 1/2192121 7/8
mm584.2108323.9368.3273.125412.7482.650.847.6
in1226.54.881517.7512.7511.12 1/222.52.12162
mm673.1124381450.9323.9282.412.7571.553.850.8
in1429.55.2516.2519.51411.75 1/2252.38162 1/4
mm749.3133.4412.8495.3355.6298.512.763560.557.2
in1632.55.7518.521.751612.25 1/227.82.6162 1/2
mm825.5146.1469.9552.1406.4311.212.7704.966.563.5
in18366.382123.51812.88 1/230.52.88162 3/4
mm914.4162.1533.4596.9457.2327.212.7774.773.269.9
in2038.7572325.252014 1/232.753.12163
mm984.3177.8584.2641.4508355.612.7831.979.276.2
in2446827.25302416 1/2393.62163 1/2
mm1168.4203.2692.2762609.6406.412.7990.691.988.9

Orifice WN Flange Union Class 2500 Dimensions

DrillingRing Type Joint
Nom SizeODThicknessOD of RFDia at BaseDia BevelLTHDia of Pressure ConnectionBolt CircleHole Dia# of holesBolt DiaGrove #Pitch DiaGroove DepthGroove WidthRad at BottomSpec Oval RH
OCRXAYTTPEFr maxW
in16.251.522.251.323.62 1/44.2514 7/8R182.3750.250.3440.031
mm158.838.150.857.233.591.96.410825.422.260.3256.358.7380.825.4
in1 1/281.752.883.121.94.38 1/45.751.2541 1/8R233.250.3120.4690.031.06
mm203.244.573.279.248.3111.36.4146.131.828.682.557.92511.9130.826.9
in29.2523.623.752.385 1/46.751.1281R2640.3120.4690.031.06
mm23550.891.995.360.51276.4171.528.425.4101.67.92511.9130.826.9
in2 1/210.52.254.124.52.885.62 1/47.751.2581 1/8R284.3750.3750.5310.061.19
mm266.757.2104.6114.373.2142.76.4196.931.828.6111.1259.52513.4871.530.2
in3122.6255.253.56.62 3/891.3881 1/4R3250.3750.5310.061.19
mm304.866.5127133.488.9168.19.5228.635.131.81279.52513.4871.530.2
in41436.196.54.57.5 1/210.751.6281 1/2
mm355.676.2157.2165.1114.3190.512.7273.141.138.1
in6194.258.59.256.6310.75 1/214.52.1282
mm482.6108215.9235168.4273.112.7368.353.850.8
in821.75510.62128.6312.5 1/217.252.12122
mm552.5127269.7304.8219.2317.512.7438.253.850.8
in1026.56.512.7514.7510.7516.5 1/221.252.62122 1/2
mm673.1165.1323.9374.7273.1419.112.7539.866.563.5
in12307.251517.3812.7518.25 1/224.382.88122 3/4
mm762184.2381441.5323.9463.612.7619.373.269.9

Best quality ASME B16.36 Orifice Flange Union Dimensions, Orifice Plate Flange Union, Threaded Orifice Union, Orifice Plate Flange Union, orifice flange types, orifice flange unions,
union orifice, 2 orifice flange dimensions, 300# orifice flange dimensions, Differential Pressure Orifice Flange Union, Threaded Orifice Union in Mumbai, India.

Orifice Union Flanges Applications

Australia, Afghanistan, Algeria, Angola, Argentina, Armenia, Azerbaijan, Bahrain, Bangladesh, Benin,
Bhutan, Botswana, Brazil, Brunei, Burkina Faso, Cambodia, Cameroon, Canada, Central Africa Republic,
Chad, Chile, Colombia, Cuba, Cyprus, DRC, Djibouti, Egypt, Equatorial Guinea, Eritrea, Eswatini,
Ethiopia, Fiji, Finland, France, Georgia, Germany, Ghana, Greece, Hungary, Iceland, Indonesia, Iran,
Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kenya, Kuwait, Kyrgyzstan, Laos, Lebanon,
Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Malaysia, Maldives, Mali, Mexico, Morocco,
Mozambique, Mauritania, Myanmar, Namibia, Nepal, Netherlands, New Zealand, Nigeria, Norway, Oman,
Panama, Peru, Philippines, Poland, Portugal, Palestine, Qatar, Russia, Rwanda, Romania, Saudi Arabia,
Senegal, Sierra Leone, Singapore, Slovakia, Somalia, South Africa, South Korea, South Sudan, Spain,
Sri Lanka, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Tasmania, Thailand, The Gambia,
Timor-Leste, Togo, Tunisia, Turkey, Turkiye, Turkmenistan, Uganda, Uzbekistan, United Arab Emirates (UAE),
United Kingdom (UK), United States (US), Venezuela, Vietnam, Yemen, Zambia, Zimbabwe

Abu Dhabi, Amsterdam, Abuja, Accra, Addis Ababa, Ahmedabad, Algiers, Amman, Ankara, Antananarivo,
Ashgabat, Asmara, Astana, Athens, Baghdad, Baku, Bamako, Bandar Seri Begawan, Bangkok, Bangui,
Banjul, Beirut, Bengaluru, Berlin, Bishkek, Bloemfontein, Bogotá, Bern, Brasília, Bratislava,
Bucharest, Budapest, Buenos Aires, Cairo, Canberra, Cape Town, Caracas, Chennai, Coimbatore, Dakar,
Damascus, Dhaka, Dili, Djibouti city, Dodoma, Doha, Dublin, Dushanbe, Freetown, Gaborone, Ghaziabad,
Guwahati, Hanoi, Harare, Havana, Helsinki, Hobart, Hyderabad, Indore, Jaipur, Jakarta, Jerusalem,
Juba, Jurong East, Kabul, Kampala, Kanpur, Kathmandu, Kigali, Kinshasa, Kochi, Kolkata, Kuala Lumpur,
Kuwait City, Lisbon, Lilongwe, Lima, Lobamba, Lomé, London, Luanda, Lucknow, Lusaka, Malabo, Madrid,
Malé, Mexico City, Manama, Moscow, Manila, Maputo, Maseru, Mbabane, Mogadishu, Monrovia, Mumabi,
Muscat, Nagpur, Nairobi, New Delhi, Niamey, Nicosia, Noida, Nouakchott, N’Djamena, Oslo, Ottawa,
Ouagadougou, Panama City, Paris, Patna, Phnom Penh, Porto-Novo, Pretoria, Pune, Rabat, Reykjavík,
Riyadh, Rome, Sana’a, Santiago, Sri Jayawardenepura Kotte, Stockholm, Seoul, Singapore, Surat,
Suva, Taipei City, Tashkent, Tokyo, Tbilisi, Tehran, Thimphu, Tripoli, Tunis, Vientiane, Vilnius,
Visakhapatnam, Warsaw, Washington D.C., Wellington, Windhoek, Yaoundé, Yerevan, Naypyidaw

Orifice Union Flanges Price

Omaa Metal Sources is ASME B16.5 Orifice Union Flanges Exporters and Suppliers in the US, UK, South Africa, Saudi Arabia, Singapore, UAE, Oman, South Korea, Turkey, Bahrain, Malaysia, Philippines, Thailand, Norway, Indonesia, Iraq, Yemen, Bangladesh, Nigeria, Egypt, Peru, Ghana, Morocco, Etc.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy
Translate »
Sent us your inquiry using WhatsApp