Carbon Steel ST37-2 Flanges

Home » Carbon Steel ST37-2 Flanges

CS ST37-2 Threaded Flanges, ST37-2 Carbon Steel slip on Flanges Supplier, ST37-2 Socket Weld Flanges, Carbon Steel ST37-2 weld neck Flange, ST37-2 Carbon Steel Pipe Flanges, Carbon Steel ST37-2 Forged Flanges Manufacturer in India.

ST37-2 is a commonly used structural steel grade according to the German DIN 17100 standard. However, when it comes to flanges, the material specification is typically indicated as part of the flange standard. ST37-2 is not specifically a flange material grade.

Flanges are typically manufactured from a variety of materials, including carbon steel, stainless steel, and alloy steel, depending on the specific requirements of the application. The material specification for a flange should comply with the relevant flange standard, such as ASME B16.5 for pipe flanges or EN 1092-1 for flanges in Europe.

If you are looking for flanges with specific material requirements, it would be best to consult the applicable flange standards or contact a reputable flange manufacturer or supplier for assistance in selecting the appropriate material grade for your application. Contact Omaaforged

ANSI/ASME B16.5 ST37-2 Flanges Supplier

Ready Stock of ST37-2 Socket Weld Flange, Lap joint Flanges, Carbon Steel ST37-2 Spectacle Blind Flanges, ISO Approved CS ST37-2 Blind Flanges, Suppliers of ST37-2 Carbon Steel Welding Neck Flange, Check Sizes And Dimensions Of ST37-2 CS Forged Flanges.

ST37-2 Flange Specifications

Size Range

1/2" (15 NB) to 48" (1200NB) DN10~DN5000

Class / Pressure Rating

150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Standards / Dimensions

ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605

Connection Type

Ring Joint Flange (RTJ), Flat Face Flange (FF), Raised Face Flange (RF), Male and Female Flange (M & F), Lap Joint Flange, Large and Small Tongue-and-Groove Flange (T & G)

Carbon Steel ST37-2 Flanges Chemical Composition

Steel gradeStylesCarbon, max, %Silicon, %Manganese, %Phosphorus, max, %Sulfur, max, %Nitrogen, max, %
ST37-2Steel Angles0.200.15 – 0.350.35 – 0.750.0500.0500.011

ST37-2 Carbon Steel Flanges Mechanical Properties

Steel gradeStylesTensile strength, ksi [MPa]Yield point, min, ksi [MPa]Elongation, min, δ, %
ST37-2Steel Angles52 – 67 [360 – 460]34 [235]25

Find the largest ready stock of Carbon Steel ST37-2 Flanges, Check Availability of ST37-2 Carbon Steel Threaded Flanges, ST37-2 Reducing Flanges Stockist, ST37-2 CS BLRF Flanges Supplier, Competitive Price of Carbon Steel ST37-2 Slip on Flange, ST37-2 Carbon Steel Plate flange Dimension, ST37-2 Carbon Steel Flange Price List, Carbon Steel ST37-2 Flanges Exporter, ST37-2 Carbon Steel Forged Flanges in Mumbai, India.

ST37-2 Flanges Dimensions & Size

NPS
(in.)
Carbon Steel ST37-2 Flanges Dimensions
Dia. of
Flange
(in.)
No.
of
Bolts
Dia. of
Bolts
(in.)
Dia. of
Bolt Holes
(in.)
Bolt
Circle
(in.)
1/43-3/841/20.622-1/4
1/23-1/241/20.622-3/8
3/43-7/841/20.622-3/4
14-1/441/20.623-1/8
1-1/44-5/841/20.623-1/2
1-1/2541/20.623-7/8
2645/80.754-3/4
2-1/2745/80.755-1/2
37-1/245/80.756
3-1/28-1/285/80.757
4985/80.757-1/2
51083/40.888-1/2
61183/40.889-1/2
813-1/283/40.8811-3/4
1016127/8114-1/4
1219127/8117
14211211.1218-3/4
1623-1/21611.1221-1/4
1825161-1/81.2522-3/4
2027-1/2201-1/81.2525
2432201-1/41.3829-1/2

Carbon Steel ST37-2 Flanges Weight Chart

15mm (1/2″) ST37-2 Flange Weight Chart
StandardClassDiameterBolt Circle DiameterNumber of BoltsBolt SizeDiameter of Bolt Hole
ANSI B16.5 FlangesANSI 150 Flanges896041316
ANSI 300 Flanges956741316
ANSI 600 Flanges956741316
ANSI 900 Flanges1218341922
ANSI 1500 Flanges1218341922
AS4087 FlangesPN14 Flanges95674M1214
AS 2129 FlangeTable C Flanges956741314
Table D Flanges956741314
Table E Flanges956741314
Table F Flanges956741314
Table H Flanges1148341617
Table J Flanges1148341617
ISO 7005 (DIN) FlangePN6 Flanges80554M1011
PN10 Flanges95654M1214
PN16 Flanges95654M1214
PN20 Flanges9060.54M1416
PN25 Flanges95654M1214
PN40 Flanges95654M1214

ST37-2 Flange Pressure Ratings

NPS (Nominal Pipe Size)SORF (Slip On)NPT (Threaded)SWRF (Socket Weld)Loose (Lap Joint)BLRF (Blind)WRNR (Weld Neck)
½112122
¾222222
1222223
333333
333344
2555556
8888710
39999911.5
111211111312
4131313131716.5
5151515152021
6191919192726
8303030304742
10434343437054
126464646412388
14909090105140114
161069898140180140
18130130130160220165
20165165165195285197
22185185185245355225
24220220220275430268

CS ST37-2 Flanges Dimensional Size Chart

Normal Sizes In inchDimensionCarbon Steel ST37-2 Flanges Dimensional Sizes 1/2 inch. to 2 1/2 inch.
Class 125
Class 150
Class 300Class 400Class 600Class 900Class 1500Class 2500
inch.mminch.millimeterinch.mminch.mminch.mminch.mminchmm
1/2A3 1/288.93 3/495.23 3/495.23 3/495.24 3/41214 3/41215 1/4133.4
b7/1611.19/1614.39/1614.39/1614.37/822.27/822.21 3/1630.2
D21 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.91 3/834.9
D12 3/860.32 5/866.72 5/866.72 5/866.73 1/482.63 1/482.63 1/288.9
n44444444444444
d5/815.95/815.95/815.95/815.97/822.27/822.27/822.2
3/4A3 7/898.44 5/8117.54 5/8117.54 5/8117.55 1/81305 1/81305 1/2139.7
b1/212.75/815.95/815.95/815.9125.4125.41 1/431.8
D21 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.91 11/1642.9
D12 3/469.83 1/482.53 1/482.53 1/482.53 1/288.93 1/288.93 3/495.2
n44444444444444
d5/815.93/4193/4193/4197/822.27/822.27/822.2
1A4 1/41084 7/8123.84 7/8123.84 7/8123.85 7/8149.25 7/8149.26 1/4159
b9/1614.311/1617.511/1617.511/1617.51 1/828.61 1/828.61 3/834.9
D2250.8250.8250.8250.8250.8250.8250.8
D13 1/879.43 1/288.93 1/288.93 1/288.9410241024 1/4108
n44444444444444
d5/815.93/4193/4193/419125.4125.4125.4
1 1/4A4 5/8117.55 1/4133.45 1/4133.45 1/4133.46 1/41596 1/41597 1/4184.2
b5/815.93/41913/1620.613/1620.61 1/828.61 1/828.61 1/238.1
D22 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.52 1/263.5
D13 1/288.93 7/898.43 7/898.43 7/898.44 3/81114 3/81115 1/8130
n44444444444444
d5/815.93/4193/4193/419125.4125.41 1/828.6
1 1/2A51276 1/8155.66 1/8155.66 1/8155.67177.87177.88203
b11/1617.513/1620.67/822.27/822.21 1/431.81 1/431.81 3/444.5
D22 7/873 982 7/8732 7/8732 7/8732 7/8732 7/8732 7/873
D13 7/844 1/21144 1/21144 1/21144 7/81244 7/81245 3/4146
n44444444444444
d5/8. 15.97/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8
2A6152.46 1/2165.16 1/2165.16 1/2165.18 1/2215.98 1/2215.99 1/4234.9
b3/4197/822.2125.4125.41 1/238.11 1/238.1250.8
D23 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.13 5/892.1
D14 3/41215127512751276 1/2165.16 1/2165.16 3/4171
n44888888888888
d3/4193/4193/4193/419125.4125.41 1/828.6
2 1/2A7177.87 1/2190.57 1/2190.57 1/2190.59 5/82449 5/824410 1/2266.7
b7/822.2125.41 1/828.61 1/828.61 5/841.31 5/841.32 1/457.2
D24 1/8104.84 1/8104.84 1/8104.84 1/8104.84 1/81054 1/81054 1/8105
D15 1/2139.75 7/8149.25 7/8149.25 7/8149.27 1/2190.57 1/2190.57 3/4197
n44888888888888
d3/4197/822.27/822.27/822.21 1/828.61 1/828.61 1/431.8

Carbon Steel ST37-2 Flange Dimensional Tolerance

Outside DiameterWhen O.D. is 24″ or less ±1.6mm﹡
Inside Diameter10″ and smaller ±0.8mm
12″ thru 18″ ±1.6mm
20″ and larger +3.2mm, -1.6mm
Outside Diameter of hub5″ and smaller +2.4mm, -0.8mm﹡
6″ and larger +4.0mm, -0.8mm
Diameter of contact face1/16″ rasied face tongue and groove male, female ±0.8mm
1/4″ rasied face tongue and groove male, female ±0.4mm
Diameter of hub at basewhen hub base is 24″ or smaller ±1.6mm﹡
Diameter of hub at point of welding5″ and smaller +2.4mm, -0.8mm
6″ and larger +4.0mm, -0.8mm
DrillingBolt circle ±1.6mm
Bolt hole spacing ±0.8mm
Eccentricity of bolt circle with respect to facing2 1/2″ and smaller: 0.8mm, max﹡
Eccentricity of bolt circle with respect to bore3″ and larger: 1.6mm, max﹡
Thickness18″ and smaller +3.2mm, -0mm
20″ and larger +4.8mm, -0mm
Length of thru hub10″ and smaller ±1.6mm
12″ and larger ±3.2mm

Best quality Carbon Steel ST37-2 Flanges, Carbon Steel ST37-2  Flanges Price, Carbon Steel ST37-2 Plate Flange Flat Face, ST37-2 CS Spectacle Blind Flange, ST37-2 Square Flange, ST37-2 Carbon Steel Orifice Flanges, View Specification Of ST37-2 Orifice Flange, ST37-2 Carbon Steel Flanges Facing Type & Finish, Carbon Steel ST37-2 Class 150 Flanges Raised Face, CS Grade ST37-2 Nipoflange, MSS SP-44 Carbon Steel ST37-2  Flange, ST37-2 Carbon Steel Groove Flange, Carbon Steel ST37-2 Expander Flanges at Best Price.

Carbon Steel ST37-2 Flanges Applications

Australia, Afghanistan, Algeria, Angola, Argentina, Armenia, Azerbaijan, Bahrain, Bangladesh, Benin,
Bhutan, Botswana, Brazil, Brunei, Burkina Faso, Cambodia, Cameroon, Canada, Central Africa Republic,
Chad, Chile, Colombia, Cuba, Cyprus, DRC, Djibouti, Egypt, Equatorial Guinea, Eritrea, Eswatini,
Ethiopia, Fiji, Finland, France, Georgia, Germany, Ghana, Greece, Hungary, Iceland, Indonesia, Iran,
Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kenya, Kuwait, Kyrgyzstan, Laos, Lebanon,
Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Malaysia, Maldives, Mali, Mexico, Morocco,
Mozambique, Mauritania, Myanmar, Namibia, Nepal, Netherlands, New Zealand, Nigeria, Norway, Oman,
Panama, Peru, Philippines, Poland, Portugal, Palestine, Qatar, Russia, Rwanda, Romania, Saudi Arabia,
Senegal, Sierra Leone, Singapore, Slovakia, Somalia, South Africa, South Korea, South Sudan, Spain,
Sri Lanka, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Tasmania, Thailand, The Gambia,
Timor-Leste, Togo, Tunisia, Turkey, Turkiye, Turkmenistan, Uganda, Uzbekistan, United Arab Emirates (UAE),
United Kingdom (UK), United States (US), Venezuela, Vietnam, Yemen, Zambia, Zimbabwe

Abu Dhabi, Amsterdam, Abuja, Accra, Addis Ababa, Ahmedabad, Algiers, Amman, Ankara, Antananarivo,
Ashgabat, Asmara, Astana, Athens, Baghdad, Baku, Bamako, Bandar Seri Begawan, Bangkok, Bangui,
Banjul, Beirut, Bengaluru, Berlin, Bishkek, Bloemfontein, Bogotá, Bern, Brasília, Bratislava,
Bucharest, Budapest, Buenos Aires, Cairo, Canberra, Cape Town, Caracas, Chennai, Coimbatore, Dakar,
Damascus, Dhaka, Dili, Djibouti city, Dodoma, Doha, Dublin, Dushanbe, Freetown, Gaborone, Ghaziabad,
Guwahati, Hanoi, Harare, Havana, Helsinki, Hobart, Hyderabad, Indore, Jaipur, Jakarta, Jerusalem,
Juba, Jurong East, Kabul, Kampala, Kanpur, Kathmandu, Kigali, Kinshasa, Kochi, Kolkata, Kuala Lumpur,
Kuwait City, Lisbon, Lilongwe, Lima, Lobamba, Lomé, London, Luanda, Lucknow, Lusaka, Malabo, Madrid,
Malé, Mexico City, Manama, Moscow, Manila, Maputo, Maseru, Mbabane, Mogadishu, Monrovia, Mumabi,
Muscat, Nagpur, Nairobi, New Delhi, Niamey, Nicosia, Noida, Nouakchott, N’Djamena, Oslo, Ottawa,
Ouagadougou, Panama City, Paris, Patna, Phnom Penh, Porto-Novo, Pretoria, Pune, Rabat, Reykjavík,
Riyadh, Rome, Sana’a, Santiago, Sri Jayawardenepura Kotte, Stockholm, Seoul, Singapore, Surat,
Suva, Taipei City, Tashkent, Tokyo, Tbilisi, Tehran, Thimphu, Tripoli, Tunis, Vientiane, Vilnius,
Visakhapatnam, Warsaw, Washington D.C., Wellington, Windhoek, Yaoundé, Yerevan, Naypyidaw

ST37-2 Flanges Price

Omaa Metal Sources is ANSI/ASME B16.5 Carbon Steel ST37-2 Flanges Exporters and Suppliers in the US, UK, South Africa, Saudi Arabia, Singapore, UAE, Oman, South Korea, Turkey, Bahrain, Malaysia, Philippines, Thailand, Norway, Indonesia, Iraq, Yemen, Bangladesh, Nigeria, Egypt, Peru, Ghana, Morocco, Etc.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Sent us your inquiry using WhatsApp