ASME B16.5 Flanges

ASME B16.5 Socket Weld Flanges, ASME B16.5 Orifice Flange, ASME B16.5 weld neck Flange, ASME B16.5 slip on Flanges Supplier, ANSI B16.5 Threaded Flanges, ASME B16.5 Spectacle blind Flanges Manufacturer in India.

ANSI, ASME, and ASA B16.5 are all standards that specify the dimensions and technical requirements for flanges used in piping systems. Here is a brief overview of each standard:

ANSI B16.5: The American National Standards Institute (ANSI) B16.5 standard covers steel pipe flanges and flanged fittings from NPS 1/2 through NPS 24. It includes requirements for flange facings, bolting, gaskets, and tolerances.

ASME B16.5: The American Society of Mechanical Engineers (ASME) B16.5 standard is identical to ANSI B16.5 and covers the same range of sizes and types of flanges.

ASA B16.5: The American Standards Association (ASA) B16.5 standard is the precursor to ANSI B16.5 and is now obsolete. However, the term “ASA” is still sometimes used colloquially to refer to flanges that comply with ANSI B16.5.

All three standards specify flange dimensions in inches and use the same pressure-temperature ratings for class 150, 300, 600, 900, 1500, and 2500. However, there are some minor differences in the dimensions of the flange faces and bolt circles between the standards. It is important to use the correct standard when selecting flanges for a piping system to ensure proper compatibility and performance.

ANSI/ASME B16.5 Flanges Supplier

ASME B16 5 Ring Type Joint Orifice Flange, ASME B16.5 Class 300 Flanges, ANSI B16.5 Class 150 Flanges, Ready Stock of ASME B16.5 Socket Weld Flange, Suppliers of ASA B16.5 Welding Neck Flange, Check Sizes And Dimensions Of ASME B16.5 Forged Flanges.

ASME B16.5 Flange Specifications

Size Range

1/2" (15 NB) to 48" (1200NB) DN10~DN5000

Class / Pressure Rating

150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Standards / Dimensions

ANSI/ASME B16.5, B16.36, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605

Connection Type

Ring Joint Flange (RTJ), Flat Face Flange (FF), Raised Face Flange (RF), Male and Female Flange (M & F), Lap Joint Flange, Large and Small Tongue-and-Groove Flange (T & G)

ASME B16.5 Flanges Dimensions

ASME B16.5 Flanges Class 150 ASME B16.5 Flanges Class 300
ASME B16.5 Flanges Class 400 ASME B16.5 Flanges Class 600
ASME B16.5 Flanges Class 900 ASME B16.5 Flanges Class 1500
ASME B16.5 Flanges Class 2500
ASME B16.5 CLASS 150 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 150 RTJ Facing Flanges
NPS N P E F
1 15 47.63 6.35 8.74
1-1/4 17 57.15 6.35 8.74
1-1/2 19 65.07 6.35 8.74
2 22 82.55 6.35 8.74
2-1/2 25 101.60 6.35 8.74
3 29 114.30 6.35 8.74
3-1/2 33 131.78 6.35 8.74
4 36 149.23 6.35 8.74
5 40 171.45 6.35 8.74
6 43 193.68 6.35 8.74
8 48 247.65 6.35 8.74
10 52 304.80 6.35 8.74
12 56 381.00 6.35 8.74
14 59 396.88 6.35 8.74
16 64 454.03 6.35 8.74
18 68 517.53 6.35 8.74
20 72 558.80 6.35 8.74
22 80 615.95 6.35 8.74
24 76 673.10 6.35 8.74
NPS r G h L
1 0.8 63.5 4 75
1-1/4 0.8 73.0 4 85
1-1/2 0.8 82.5 4 85
2 0.8 102 4 95
2-1/2 0.8 121 4 100
3 0.8 133 4 100
3-1/2 0.8 154 4 100
4 0.8 171 4 100
5 0.8 194 4 110
6 0.8 219 4 115
8 0.8 273 4 120
10 0.8 330 4 125
12 0.8 406 4 135
14 0.8 425 3 145
16 0.8 483 3 145
18 0.8 546 3 160
20 0.8 597 3 170
22 0.8 648 3 185
24 0.8 711 3 185
ASME B16.5 CLASS 300 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 300 RTJ Facing Flanges
NPS Groove No. P E F
1/2 11 34.14 5.54 7.14
3/4 13 42.88 6.35 8.74
1 16 50.80 6.35 8.74
1-1/4 18 60.33 6.35 8.74
1-1/2 20 68.27 6.35 8.74
2 23 82.55 7.92 11.91
2-1/2 26 101.60 7.92 11.91
3 30 117.48 7.92 11.91
3-1/2 34 131.78 7.92 11.91
4 37 149.23 7.92 11.91
5 41 180.98 7.92 11.91
6 45 211.12 7.92 11.91
8 49 269.88 7.92 11.91
10 53 323.85 7.92 11.91
12 57 381.00 7.92 11.91
14 61 419.10 7.92 11.91
16 65 469.90 7.92 11.91
18 69 533.40 7.92 11.91
20 73 584.20 9.53 13.49
22 81 635.00 11.13 15.09
24 77 629.15 11.13 16.66
NPS r G h L
1/2 0.8 51.0 3 75
3/4 0.8 63.5 4 90
1 0.8 70.0 4 90
1-1/4 0.8 79.5 4 95
1-1/2 0.8 90.5 4 100
2 0.8 108 6 100
2-1/2 0.8 127 6 115
3 0.8 146 6 120
3-1/2 0.8 159 6 125
4 0.8 175 6 125
5 0.8 210 6 135
6 0.8 241 6 140
8 0.8 302 6 150
10 0.8 356 6 170
12 0.8 413 6 185
14 0.8 457 6 190
16 0.8 508 6 205
18 0.8 575 6 210
20 1.5 635 6 220
22 1.5 686 6 255
24 1.5 749 6 255

Find the largest ready stock of ASME B16.5 Class 900 Flanges, ASME B16.5 Slip On Flanges Dealer, Check Availability of B16.5 Threaded Flanges, ASME B16.5 Flange Price List, ASME B16.5 Reducing Flanges Stockist, ASME B16.5 RF Flanges Supplier, ASME B16.5 Forged Flanges in Mumbai, India.

ASME B16.5 CLASS 400 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 400 RTJ Facing Flanges
NPS Groove No. P E F
1/2 11 34.14 5.54 7.14
3/4 13 42.88 6.35 8.74
1 16 50.80 6.35 8.74
1-1/4 18 60.33 6.35 8.74
1-1/2 20 68.27 6.35 8.74
2 23 82.55 7.92 11.91
2-1/2 26 101.60 7.92 11.91
3 30 117.48 7.92 11.91
3-1/2 34 131.78 7.92 11.91
4 37 149.23 7.92 11.91
5 41 180.98 7.92 11.91
6 45 211.12 7.92 11.91
8 49 269.88 7.92 11.91
10 53 323.85 7.92 11.91
12 57 381.00 7.92 11.91
14 61 419.10 7.92 11.91
16 65 469.90 7.92 11.91
18 69 533.40 7.92 11.91
20 73 584.20 9.53 13.49
22 81 635.00 11.13 15.09
24 77 692.15 11.13 16.66
NPS r G h L
1/2 0.8 51.0 3 75
3/4 0.8 63.5 4 90
1 0.8 70.0 4 90
1-1/4 0.8 79.5 4 95
1-1/2 0.8 90.5 4 110
2 0.8 108 5 110
2-1/2 0.8 127 5 120
3 0.8 146 5 125
3-1/2 0.8 159 5 140
4 0.8 175 6 140
5 0.8 210 6 145
6 0.8 241 6 150
8 0.8 302 6 170
10 0.8 356 6 190
12 0.8 413 6 205
14 0.8 457 6 210
16 0.8 508 6 220
18 0.8 575 6 230
20 1.5 635 6 250
22 1.5 686 6 260
24 1.5 749 6 280
ASME B16.5 CLASS 600 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 600 RTJ Facing Flanges
NPS Groove No. P E F
1/2 11 34.14 5.54 7.14
3/4 13 42.88 6.35 8.74
1 16 50.80 6.35 8.74
1-1/4 18 60.33 6.35 8.74
1-1/2 20 68.27 6.35 8.74
2 23 82.55 7.92 11.91
2-1/2 26 101.60 7.92 11.91
3 30 117.48 7.92 11.91
3-1/2 34 131.78 7.92 11.91
4 37 149.23 7.92 11.91
5 41 180.98 7.92 11.91
6 45 211.12 7.92 11.91
8 49 269.88 7.92 11.91
10 53 323.85 7.92 11.91
12 57 381.00 7.92 11.91
14 61 419.10 7.92 11.91
16 65 469.90 7.92 11.91
18 69 533.40 7.92 11.91
20 73 584.20 9.53 13.49
22 81 635.00 11.13 15.09
24 77 692.15 11.13 16.66
NPS r G h L
1/2 0.8 51.0 3 75
3/4 0.8 63.5 4 90
1 0.8 70.0 4 90
1-1/4 0.8 79.5 4 95
1-1/2 0.8 90.5 4 110
2 0.8 108 5 110
2-1/2 0.8 127 5 120
3 0.8 146 5 125
3-1/2 0.8 159 5 140
4 0.8 175 5 145
5 0.8 210 5 165
6 0.8 241 5 170
8 0.8 302 5 195
10 0.8 356 5 215
12 0.8 413 5 220
14 0.8 457 5 235
16 0.8 508 5 255
18 0.8 575 5 275
20 1.5 635 5 290
22 1.5 686 6 310
24 1.5 749 6 335
ASME B16.5 CLASS 900 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 900 RTJ Facing Flanges
NPS Groove No. P E F
1/2 12 39.67 6.35 8.74
3/4 14 44.45 6.35 8.74
1 16 50.80 6.35 8.74
1-1/4 18 60.33 6.35 8.74
1-1/2 20 68.27 6.35 8.74
2 24 95.25 7.92 11.91
2-1/2 27 107.95 7.92 11.91
3 31 123.83 7.92 11.91
4 37 149.23 7.92 11.91
5 41 180.98 7.92 11.91
6 45 211.12 7.92 11.91
8 49 269.88 7.92 11.91
10 53 323.85 7.92 11.91
12 57 381.00 7.92 11.91
14 62 419.10 11.13 16.66
16 66 469.90 11.13 16.66
18 70 533.40 12.70 19.84
20 74 584.20 12.70 19.84
24 78 692.15 15.88 26.97
NPS r G h L
1/2 0.8 60.5 4 110
3/4 0.8 66.5 4 115
1 0.8 71.5 4 125
1-1/4 0.8 81.0 4 125
1-1/2 0.8 92.0 4 140
2 0.8 124 3 145
2-1/2 0.8 137 3 160
3 0.8 156 4 145
4 0.8 181 4 170
5 0.8 216 4 190
6 0.8 241 4 195
8 0.8 308 4 220
10 0.8 362 4 235
12 0.8 419 4 255
14 1.5 467 4 280
16 1.5 524 4 290
18 1.5 594 5 335
20 1.5 648 5 360
24 2.4 772 6 455
ASME B16.5 CLASS 1500 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 1500 RTJ Facing Flanges
NPS Groove No. P E F
1/2 12 39.67 6.35 8.74
3/4 14 44.45 6.35 8.74
1 16 50.80 6.35 8.74
1-1/4 18 60.33 6.35 8.74
1-1/2 20 68.27 6.35 8.74
2 24 95.25 7.92 11.91
2-1/2 27 107.95 7.92 11.91
3 35 136.53 7.92 11.91
4 39 161.93 7.92 11.91
5 44 193.68 7.92 11.91
6 46 211.14 9.53 13.49
8 50 269.88 11.13 16.66
10 54 323.85 11.13 16.66
12 58 381.00 14.27 23.01
14 63 419.10 15.88 26.97
16 67 469.90 17.48 30.18
18 71 533.40 17.48 30.18
20 75 584.20 17.48 33.32
24 79 692.15 20.62 36.53
NPS r G h L
1/2 0.8 60.5 4 110
3/4 0.8 66.5 4 115
1 0.8 71.5 4 125
1-1/4 0.8 81.0 4 125
1-1/2 0.8 92.0 4 140
2 0.8 124 3 145
2-1/2 0.8 137 3 160
3 0.8 168 3 180
4 0.8 194 3 195
5 0.8 229 3 250
6 1.5 248 3 265
8 1.5 318 4 300
10 2.4 371 4 345
12 2.4 438 5 385
14 2.4 489 6 425
16 2.4 546 8 470
18 2.4 613 8 525
20 2.4 673 10 565
24 2.4 794 11 650
ASME B16.5 CLASS 2500 RTJ FACING FLANGES DIMENSIONS AND TECHNICAL DRAWINGS
ASME B16.5 CLASS 2500 RTJ Facing Flanges
NPS Groove No. P E F
1/2 13 42.88 6.35 8.74
3/4 16 50.80 6.35 8.74
1 18 60.33 6.35 8.74
1-1/4 21 72.23 7.92 11.91
1-1/2 23 82.55 7.92 11.91
2 26 101.60 7.92 11.91
2-1/2 28 111.13 9.53 13.49
3 32 127.00 9.53 13.49
4 38 157.18 11.13 16.66
5 42 190.50 12.70 19.84
6 47 228.60 12.70 19.84
8 51 279.40 14.27 23.01
10 55 342.90 17.48 30.18
12 60 406.40 17.48 33.32
>
NPS r G h L
1/2 0.8 65.0 4 120
3/4 0.8 73.0 4 125
1 0.8 82.5 4 140
1-1/4 0.8 102 3 150
1-1/2 0.8 114 3 170
2 0.8 133 3 180
2-1/2 1.5 149 3 205
3 1.5 168 3 230
4 1.5 203 4 260
5 1.5 241 4 310
6 1.5 279 4 355
8 1.5 340 5 395
10 2.4 425 6 510
12 2.4 495 8 560

ASME B16.5 Flanges Weight Chart

CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
150 lb ½ 1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
3 3 3 3 4 4
2 5 5 5 5 5 6
8 8 8 8 7 10
3 9 9 9 9 9 11.5
11 12 11 11 13 12
4 13 13 13 13 17 16.5
5 15 15 15 15 20 21
6 19 19 19 19 27 26
8 30 30 30 30 47 42
10 43 43 43 43 70 54
12 64 64 64 64 123 88
14 90 90 90 105 140 114
16 106 98 98 140 180 140
18 130 130 130 160 220 165
20 165 165 165 195 285 197
22 185 185 185 245 355 225
24 220 220 220 275 430 268
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
300 lb ½ 2 2 3 2 2 2
¾ 3 3 3 3 3 3
1 3 3 3 3 4 4
4.5 4.5 4 4.5 6 5
6.5 6.5 6 6.5 7 7
2 7 7 7 7 8 9
10 10 10 10 12 12
3 13 14 13 14.5 16 18
17 17 17 17 21 20
4 23.5 24 22 24 28 26.5
5 29 31 28 28 37 36
6 39 39 39 39 50 45
8 58 58 58 58 81 69
10 81 81 81 91 124 100
12 115 115 115 140 185 142
14 165 165 165 190 250 206
16 210 220 190 234 315 250
18 253 280 250 305 414 320
20 315 325 315 375 515 400
22 370 370 370 435 640 465
24 490 490 475 550 800 580
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
400 lb ½ 2 2 2 2 2 3
¾ 3 3 3 3 3 3.5
1 3.5 3.5 3.5 3.5 4 4
4.5 4.5 4.5 4.5 6 4.5
6.5 6.5 6.5 6.5 8 8
2 8 8 8 8 10 10
12 12 12 11 15 14
3 15 15 15 14 20 18
21 21 21 20 29 26
4 26 26 26 25 33 35
5 31 31 31 29 44 43
6 44 44 44 42 61 57
8 67 67 67 64 100 89
10 91 91 91 110 155 125
12 130 130 130 152 226 175
14 191 191 191 210 310 233
16 253 253 253 280 398 295
18 310 310 310 345 502 360
20 378 378 378 420 621 445
22 405 405 405 455 720 505
24 539 539 539 615 936 640
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
600 lb ½ 2 2 2 2 3 3
¾ 3 3 3 3 4 4
1 4 4 4 4 4 4
5 5 5 5 6 6
7 7 7 7 8 8
2 9 9 9 9 10 12
13 13 13 12 15 18
3 16 16 16 15 20 23
21 21 21 20 29 26
4 37 37 37 36 41 42
5 63 63 63 63 68 68
6 80 80 80 78 86 81
8 115 115 115 112 140 120
10 177 177 177 195 231 190
12 215 215 215 240 295 226
14 259 259 259 290 378 347
16 366 366 366 400 527 481
18 476 476 476 469 665 555
20 612 612 612 604 855 690
22 590 590 590 670 1000 720
24 876 876 876 866 1250 977
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
900 lb ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 7.5 7.5 7.5 7.5 9 8.5
10 10 10 10 10 10
14 14 14 14 14 14
2 22 22 22 21 25 24
31 31 31 25 32 31
3 36 36 36 29 35 36
4 53 53 53 51 54 53
5 83 83 83 81 87 86
6 110 110 110 105 115 110
8 172 172 172 190 200 187
10 245 245 245 277 290 268
12 326 326 326 371 415 372
14 400 400 400 415 520 562
16 459 459 459 488 619 685
18 647 647 647 670 880 924
20 792 792 792 868 1107 1164
24 1480 1480 1480 1659 2099 2107
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
1500 lb ½ 6 6 6 6 4 7
¾ 6 6 6 6 6 7
1 8 8 8 8 9 9
10 10 10 10 10 10
14 14 14 14 14 14
2 25 25 25 25 25 25
36 36 36 35 35 36
3 48 48 48 47 48 48
4 73 73 73 75 73 73
5 132 132 132 140 140 132
6 165 165 165 170 160 165
8 260 260 260 286 302 275
10 436 436 436 485 510 455
12 667 667 667 749 775 690
14 940 940 940 890 975 940
16 1250 1250 1250 1250 1300 1250
18 1625 1625 1625 1475 1750 1625
20 2050 2050 2050 1775 2225 2050
24 2825 2825 2825 2825 3625 3325
CLASS Nominal Pipe Size Slip On Threaded Socket Weld Lap Joint Blind Weld Neck
2500 lb ½ …. 7 …. 7 7 8
¾ …. 9 …. 8 10 9
1 …. 12 …. 12 12 13
…. 18 …. 17 18 20
…. 25 …. 24 25 28
2 …. 38 …. 37 39 42
…. 55 …. 53 56 52
3 …. 83 …. 80 86 94
4 …. 127 …. 122 133 146
5 …. 210 …. 204 223 244
6 …. 323 …. 314 345 378
8 …. 485 …. 471 533 576
10 …. 925 …. 897 1025 1068
12 …. 1300 …. 1262 1464 1608

ASME B16.5 Flanges Tolerances

DIMENSIONAL TOLERANCES ■ ASME B16.5
WELDING NECK FLANGES
0 Outside Diameter When 0 is 24″ or less ±0.06″ ±1.6 mm
When O is over 24” ±0.12″ ±3.2 mm
R Diameter of Contact Face 0.06” (1.6 mm) raised face ±0.03″ ±0.8 mm
0.25″ (6.4 mm) raised face ±0.02″ ±0.5 mm
A Diameter of Hub at Point of Welding NPS 5 and smaller +0.09″, -0.03″ +2.4 mm, -0.8 mm
NPS 6 and larger +0.16″, -0.03″ +4.0 mm, -0.8 mm
B Inside Diameter NPS 10 and smaller ±0.03″ ±0.8 mm
NPS 12 to 18, inclusive ±0.06″ ±1.6 mm
NPS 20 and larger +0.12″, -0.06” +3.2 mm, -1.6 mm
X Diameter of Hub at Base When Hub Base is 24″ or less ±0.06″ ±1.6 mm
When Hub Base is over 24″ ±0.12″ ±3.2 mm
c Thickness NPS 18 and smaller +0.12″, -0.00″ +3.2 mm, -0.0 mm
NPS 20 and larger +0.19″, -0.00″ +4.8 mm, -0.0 mm
Drilling Bolt Circle Diameter ±0.06″ ±1.6 mm
Bolt Hole Spacing ±0.03″ ±0.8 mm
Eccentricity of Bolt Circle and Facing with Respect to Bore NPS 21/2 and smaller ±0.03″ ±0.8 mm
NPS 3 and larger ±0.06″ ±1.6 mm
Length Through Hub NPS 10 and smaller ±0.06″ ±1.6 mm
NPS 12 and larger ±0.12″ ±3.2 mm
SLIP-ON, LAP JOINT, SOCKET WELDING, THREADED and BLIND FLANGES
O Outside Diameter When O is 24″ or less
When O is over 24″
±0.06″ ±0.12″ ±1.6 mm
±3.2 mm
R Diameter of Contact Face 0.06″ (1.6 mm) raised face 0.25″ (6.4 mm) raised face ±0.03″ ±0.02″ ±0.8 mm
±0.5 mm
B Inside Diameter at Face of Socket Welding Flanges

Inside Diameter of Slip-On, Lap Joint, and Socket Welding

NPS 10 and smaller
NPS 12 through 18, inclusive NPS 20 and larger
±0.03″ ±0.06″ +0.12″, -0.06″ ±0.8 mm
±1.6 mm
+3.2 mm, -1.6 mm
NPS 10 and smaller
NPS 12 and larger
+0.03″, -0.00″ +0.06″, -0.00″ +0.8 mm, -0.0
+1.6 mm, -0.0 mm
Q Counterbore, Threaded Flanges NPS 10 and smaller
NPS 12 and larger
+0.03″, -0.00″ +0.06″, -0.00″ +0.8 mm, -0.0
+ 1.6 mm, -0.0 mm
X Diameter of Hub at Base NPS 12 and smaller
NPS 14 and larger
+0.09″, -0.06″ ±0.12″ +2.4 mm, -1.6
±3.2 mm
c Thickness NPS 18 and smaller
NPS 20 and larger
+0.12″, -0.00″ +0.19″, -0.00″ +3.2 mm, -0.0
+4.8 mm, -0.0 mm
Drilling Bolt Circle Diameter Bolt Hole Spacing ±0.06″ ±0.03″ ±1.6 mm
±0.8 mm
Eccentricity of Bolt Circle and Facing with Respect to Bore NPS 2V2 and smaller
NPS 3 and larger
±0.03″ ±0.06″ ±0.8 mm
±1.6 mm
Overall Length Through Hub NPS 18 and smaller
NPS 20 and larger
+0.12”, -0.03”
+0.19”, -0.03”
+3.2 mm, -0.8 mm
+4.8 mm, -1.6 mm

ASME B16.5 Flanges Pressure And Temperature Ratings

Working Pressure (bar)
Temperature (°C)
Class
150 300 400 600 900 1500 2500
-29 – 38 19.8 51.7 68.9 103.4 155 259 431
50 19.5 51.7 68.9 103.4 155 259 431
100 17.7 51.5 68.7 103.0 155 258 429
150 15.8 50.2 66.8 100.3 151 251 418
200 13.8 48.6 64.8 97.2 146 243 405
250 12.1 46.3 61.7 92.7 139 232 386
300 10.2 42.9 57.0 85.7 129 214 357
325 9.3 41.4 55.0 82.6 124 207 344
350 8.4 40.0 53.4 80.0 120 200 334
375 7.4 37.8 50.4 75.7 114 189 315
400 6.5 34.7 46.3 69.4 104 174 290
425 5.5 28.8 38.4 57.5 86.3 144 240
450 4.6 23.0 30.7 46.0 69.0 115 192
475 3.7 17.1 22.8 34.2 51.3 85.4 142
500 2.8 11.6 15.4 23.2 34.7 57.9 96.5
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2

Pressure and Temperature Ratings – Group 1.1

Working Pressure (bar)
Temperature (°C)
Class
150 300 400 600 900 1500 2500
-29 – 38 19.6 51.1 68.1 102.1 153.2 255.3 425.5
50 19.2 50.1 66.8 100.2 150.4 250.6 417.7
100 17.7 46.6 62.1 93.2 139.8 233.0 388.3
150 15.8 45.1 60.1 90.2 135.2 225.4 375.6
200 13.8 43.8 58.4 87.6 131.4 219.0 365.0
250 12.1 41.9 55.9 83.9 125.8 209.7 349.5
300 10.2 39.8 53.1 79.6 119.5 199.1 331.8
325 9.3 38.7 51.6 77.4 116.1 193.6 322.6
350 8.4 37.6 50.1 75.1 112.7 187.8 313.0
375 7.4 36.4 48.5 72.7 109.1 181.8 303.1
400 6.5 34.7 46.3 69.4 104.2 173.6 289.3
425 5.5 28.8 38.4 57.5 86.3 143.8 239.7
450 4.6 23.0 30.7 46.0 69.0 115.0 191.7
475 3.7 17.4 23.2 34.9 52.3 87.2 145.3
500 2.8 11.8 15.7 23.5 35.3 58.8 97.9
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2

Best quality ASME B16.5 Flanges, B16.5 Plate Flange Flat Face, View Specification Of ANSI B16.5 Orifice Flange, ASME B16.5 Flanges Facing Type & Finish, ASME B16.5 Weldoflange, ASME B16.5 RTJ Flange, ASME B16.5  Flanges Price, ASME B16.5 Groove Flange, ASME B16.5 Square Flange, ASME B16.5 Nipoflange, ASME B16.5 Class 1500 Flanges Raised Face, ASME B16.5 Expander Flanges at Best Price.

ASME B16.5 Flanges Applications

Australia, Afghanistan, Algeria, Angola, Argentina, Armenia, Azerbaijan, Bahrain, Bangladesh, Benin,
Bhutan, Botswana, Brazil, Brunei, Burkina Faso, Cambodia, Cameroon, Canada, Central Africa Republic,
Chad, Chile, Colombia, Cuba, Cyprus, DRC, Djibouti, Egypt, Equatorial Guinea, Eritrea, Eswatini,
Ethiopia, Fiji, Finland, France, Georgia, Germany, Ghana, Greece, Hungary, Iceland, Indonesia, Iran,
Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kenya, Kuwait, Kyrgyzstan, Laos, Lebanon,
Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Malaysia, Maldives, Mali, Mexico, Morocco,
Mozambique, Mauritania, Myanmar, Namibia, Nepal, Netherlands, New Zealand, Nigeria, Norway, Oman,
Panama, Peru, Philippines, Poland, Portugal, Palestine, Qatar, Russia, Rwanda, Romania, Saudi Arabia,
Senegal, Sierra Leone, Singapore, Slovakia, Somalia, South Africa, South Korea, South Sudan, Spain,
Sri Lanka, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Tasmania, Thailand, The Gambia,
Timor-Leste, Togo, Tunisia, Turkey, Turkiye, Turkmenistan, Uganda, Uzbekistan, United Arab Emirates (UAE),
United Kingdom (UK), United States (US), Venezuela, Vietnam, Yemen, Zambia, Zimbabwe

Abu Dhabi, Amsterdam, Abuja, Accra, Addis Ababa, Ahmedabad, Algiers, Amman, Ankara, Antananarivo,
Ashgabat, Asmara, Astana, Athens, Baghdad, Baku, Bamako, Bandar Seri Begawan, Bangkok, Bangui,
Banjul, Beirut, Bengaluru, Berlin, Bishkek, Bloemfontein, Bogotá, Bern, Brasília, Bratislava,
Bucharest, Budapest, Buenos Aires, Cairo, Canberra, Cape Town, Caracas, Chennai, Coimbatore, Dakar,
Damascus, Dhaka, Dili, Djibouti city, Dodoma, Doha, Dublin, Dushanbe, Freetown, Gaborone, Ghaziabad,
Guwahati, Hanoi, Harare, Havana, Helsinki, Hobart, Hyderabad, Indore, Jaipur, Jakarta, Jerusalem,
Juba, Jurong East, Kabul, Kampala, Kanpur, Kathmandu, Kigali, Kinshasa, Kochi, Kolkata, Kuala Lumpur,
Kuwait City, Lisbon, Lilongwe, Lima, Lobamba, Lomé, London, Luanda, Lucknow, Lusaka, Malabo, Madrid,
Malé, Mexico City, Manama, Moscow, Manila, Maputo, Maseru, Mbabane, Mogadishu, Monrovia, Mumabi,
Muscat, Nagpur, Nairobi, New Delhi, Niamey, Nicosia, Noida, Nouakchott, N’Djamena, Oslo, Ottawa,
Ouagadougou, Panama City, Paris, Patna, Phnom Penh, Porto-Novo, Pretoria, Pune, Rabat, Reykjavík,
Riyadh, Rome, Sana’a, Santiago, Sri Jayawardenepura Kotte, Stockholm, Seoul, Singapore, Surat,
Suva, Taipei City, Tashkent, Tokyo, Tbilisi, Tehran, Thimphu, Tripoli, Tunis, Vientiane, Vilnius,
Visakhapatnam, Warsaw, Washington D.C., Wellington, Windhoek, Yaoundé, Yerevan, Naypyidaw

ASME B16.5 Flanges Price

Omaa Metal Sources is ANSI/ASME B16.5 Flanges Exporters and Suppliers in the US, UK, South Africa, Saudi Arabia, Singapore, UAE, Oman, South Korea, Turkey, Bahrain, Malaysia, Philippines, Thailand, Norway, Indonesia, Iraq, Yemen, Bangladesh, Nigeria, Egypt, Peru, Ghana, Morocco, Etc.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy
Translate »
Sent us your inquiry using WhatsApp